StorageWorks 1510i Modular Smart Array SAN Starter Kit

€ 4,841.65

€ 5,761.56

HP StorageWorks 1510i Modular Smart Array (MSA1510i) is an iSCSI interface based 2U controller unit that connects to both HP StorageWorks Serial ATA (SATA) and/or SCSI disk enclosures and provides a flexible low cost, high capacity storage solution.

MPN: AE342AM

Stock: 1

+ - Order

Specifications
General
Alternatives

Product information

Category	Disk arrays
Stock	1
MPN	AE342AM

Description

HP StorageWorks 1510i Modular Smart Array SAN Starter KitThe HP StorageWorks 1510i Modular Smart Array (MSA1510i) is an iSCSI interface based 2U controller unit that connects to both HP StorageWorks Serial ATA (SATA) and/or SCSI disk enclosures and provides a flexible low cost, high capacity storage solution. The MSA1510i has been specifically designed as a foundation for future solutions to ensure maximum investment protection. For businesses that need enterprise class SCSI reliability and performance, the MSA1510i can attach up-to-four MSA30 SCSI enclosures for a native capacity of 16.8TB (using fifty-six 300GB SCSI disks). The MSA1510i is also perfect for less expensive storage solutions using SATA enclosures to store data that doesn't require a high degree of I/O performance and/or is viewed as non-mission critical to business operations. The MSA1510i supports up-to-eight attached SATA enclosures which can provide up to 64TB (using 750GB SATA disk drives) of capacity.Warranty: standard statement: HP warrants only that the Software media will be free of physical defects for a period of 90 days from delivery

Reset
Ports & interfaces
Host interface	iSCSI
Hard drive
Packaging data	16.8 TB SCSI or 24 TB SATA
Technical details
Chassis type	Rack (2U)
Other features	Insight Manager; Selective Storage Presentation (SSP); HP Storage Management Utility
Source data-sheet	.
Host interface	Two 1 Gigabit Ethernet connections per controller to an IP network\nScalable to eight- SATA enclosures for 64 TB, or 4- SCSI enclosures for 16.8 TB of storage capacity with 4- dual channel SCSI I/O cards\nThe MSA1510i supports Microsoft Initiator V2.02\nRAID 6 with Advanced Data Guarding (ADG) - Highest level of fault tolerance, allocates two sets of parity data across drives and allows simultaneous write operations, this level of fault tolerance can withstand two simultaneous drive failures without downtime or data loss\nHigh performance controller(s) built on DAS to SAN (DtS) architecture\nThe MSA 1510i supports up to 32 LUNs\nHot plug expansion and replacement support - Hot plug expansion and replacement of hard drives, fans, power supplies redundant controllers and enclosures, for simple, fast installation and maintenance\nThe MSA1510i supports a maximum 20 servers, each server needs to have the iSCSI initiator\nSupports Gigabit Ethernet switches and Routers\nAbility to mix performance class SCSI and reference class SATA storage behind the same controller for easy to install tiered storage solutions
Drive count	Up to 56 (SCSI) or 96 drives (SATA) or mixed
Cache internal	256, upgradeable - 512 per controller
Weight & dimensions
Weight	24.94 kg
Package weight	30.84 kg
Other features
Dimensions (WxDxH)	48.41 x 61.77 x 8.78 cm
Package dimensions (WxDxH)	825.5 x 865.1 x 285.7 mm
Operational conditions
Operating relative humidity (H-H)	10-90%
Storage temperature (T-T)	-30-50 °C
Operating temperature (T-T)	10 - 35 °C
Storage relative humidity (H-H)	< 95%
Host interface	10-90%
Host interface	< 95%

To page top

Batavi

ICEcat

ICEimport